Multiple (Timed) splash
- Thread starter captnk
- Start date
ghudson
Registered User.
- Local time
- Yesterday, 23:09
- Joined
- Jun 8, 2002
- Messages
- 6,193
This will do it...
Code:
If Time > "09:00" And Time < "12:00" Then
DoCmd.OpenForm "Form1", acNormal
ElseIf Time > "12:01" And Time < "15:00" Then
DoCmd.OpenForm "Form2", acNormal
ElseIf Time > "15:01" And Time < "18:00" Then
DoCmd.OpenForm "Form3", acNormal
Else
DoCmd.OpenForm "Form4", acNormal
End IfI raised this a while back and the solution works fine
However I would like to look at another option.
Instead of multiple splash pages,(one for each time/picture), is it possible to have just the picture (Within the splash page) change
The picture is just centred within the splash as a .jpg
Captnk
However I would like to look at another option.
Instead of multiple splash pages,(one for each time/picture), is it possible to have just the picture (Within the splash page) change
The picture is just centred within the splash as a .jpg
Captnk
ansentry
Access amateur
- Local time
- Today, 15:09
- Joined
- Jun 1, 2003
- Messages
- 995
ghundson,
If you see this reply would you have a look at my attached db and tell me what I have done wrong. I saw you reply and though I would have play with your code.
If you open the db , click the button "My PC Time Setting" you will see that I have my PC set for "12 Hours AM/PM" . If I set my PC time to say 3:15 AM and click the button Time 12 Hours Format it will not pick up the correct time range - shows Between 3:01 PM - 6:00 PM. Instead of Between 06:01 PM & 08:59 AM. It does not work correctly for 12:01 PM - 3:00 PM. Also the 24 hours clock version also gives me problems.
This is not urgent, I just wonder what is wrong?
Thanks in advance,
Regards,
If you see this reply would you have a look at my attached db and tell me what I have done wrong. I saw you reply and though I would have play with your code.
If you open the db , click the button "My PC Time Setting" you will see that I have my PC set for "12 Hours AM/PM" . If I set my PC time to say 3:15 AM and click the button Time 12 Hours Format it will not pick up the correct time range - shows Between 3:01 PM - 6:00 PM. Instead of Between 06:01 PM & 08:59 AM. It does not work correctly for 12:01 PM - 3:00 PM. Also the 24 hours clock version also gives me problems.
This is not urgent, I just wonder what is wrong?
Thanks in advance,
Regards,
Last edited:
ansentry
Access amateur
- Local time
- Today, 15:09
- Joined
- Jun 1, 2003
- Messages
- 995
ghudson,
sorry to bother you, can't believe what I did, fixed the probem works fine now. I had used " instead of #
The attached now works for both 12 and 24 hour.
captnk,
Have a look at the attached sample open the form frmShowJPG, others my be able to show you a better way, but this works fine. What I would do is put the code that is now behind the button "ShowJPG" into the on load event of your splash form. Read my note about removing items.
Regards,
sorry to bother you, can't believe what I did, fixed the probem works fine now. I had used " instead of #
The attached now works for both 12 and 24 hour.
captnk,
Have a look at the attached sample open the form frmShowJPG, others my be able to show you a better way, but this works fine. What I would do is put the code that is now behind the button "ShowJPG" into the on load event of your splash form. Read my note about removing items.
Regards,
Last edited:
Tks
I will have a play around with that
My Pc is also set to show am or pm time,however so far I havent seen any problem with it
I had changed the previously suggested time code to:
If Time > #9:00:00 AM# And Time < #11:59:00 AM# Then ........
Currently I am running the code from a module.
Captnk
I will have a play around with that
My Pc is also set to show am or pm time,however so far I havent seen any problem with it
I had changed the previously suggested time code to:
If Time > #9:00:00 AM# And Time < #11:59:00 AM# Then ........
Currently I am running the code from a module.
Captnk
