Align Labels

[Dick7Access]

Has A 2013 changed the way that labels are aligned, or do I need to look for some other setting. Normally in A 2010 and 2003 I could highlight a row of label click size/space > equal vertical and it would move the labels. I have checked layout, and that’s ok.

 

[Alansidman]

Try highlighting the labels and right clicking. You should get an alignment and sizing option.

 

[Dick7Access]

right click gives me size and align but not equal vertical

 

[Alansidman]

I can't find an image of the 2013 Ribbon, but if it is similar to 2007 and 2010 then open your form in design view. Highlight the controls you wish to align/space and look on the ribbon on the Arrange tab that has become available and look at the size/space icon.

Alan

 

[Dick7Access]

I can't find an image of the 2013 Ribbon, but if it is similar to 2007 and 2010 then open your form in design view. Highlight the controls you wish to align/space and look on the ribbon on the Arrange tab that has become available and look at the size/space icon.

Alan

My back up computer is still backed from my last trip, it still has A2010 on it. When I get a chance I will see if there is any difference.

 

[Dick7Access]

It was bugging me so unpacked by back up. A2010 vertical equal works fine.